FIRE FIGHTING

SCF8M-J

SCF8M-J

SCF8M-J control panels, are complete user friendly and configurable instruments, useful for automatically operate up to 75 kW  electric motor driven Jockey pumps in any environment

SCF8M-J control panels automatically start and stop Jockey pumps depending on the system’s demand; protect them by means of the connected and controller-generated alarms, visualize the most relevant values and informations, also manage the communication of the operator and both the contour elements and the remoted manned centre.

MAIN FEATURES

  • STANDARDS & TECHNICAL RULES
    1 Standard EN 12845 Ed.2016
    2 Standard NFPA-20
    3 Standard UNE 23500 Ed.2018
    4 Standard UNI 10779 Ed. 2014
    5 Standard LPC TB210 / FOC
    6 Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies
    7 Tech. Rule CEPREVEN R.T.1-ROC Ed.2004
    8 Tech. Rule CEPREVEN R.T.2-ABA Ed.2006
  • RANGE OF MODELS (according to type plate)
    1 Incoming line voltage 400 V AC / 230 V AC
    2 Mains frequency 50Hz / 60 Hz.
    3 Jockey pump size Up to 75 kW
    4 Motor starter type DOL / λ-Δ according to the motor power
  • CONSTRUCTIVE FEATURES
    1 External enclosure IP65 Protected from total dust ingress (NEMA 4)
    2 Impact rating: IK10 (except for display)
    3 Fireproof grade: Fire extinguishes <30s
    4 Display Transflective: Visible under direct sunlight
    5 Wiring Halogen free
    6 Fireproof: RZ1 according to EN50200 (830ºC for 90min)
    7 Pump room temperature 20 ºF to 122ºF (-5ºC to 55ºC)
    8 Isolation rating between phases 500 V AC
    9 Isolation rating between phases and ground 2.500 V AC
    10 Isolation impedance between phases and ground 2 MΩ
    11 Earthing system TT system (neutral and earht connected separatelly )
    12 Electromagnetic environment CEM-1
  • MEASURING INSTRUMENTS IN THE DISPLAY
    1 System 3 Voltmeter: voltage for every phase L1-L2-L3 (RMS)
    2 1 Mains frequency meter
    3 1 pump rotation/phase rotation
    4 1 Manometer pump discharge pressure ( pressure sensor required with 4-20 mA signal)
    5 Jockey pump 1 Ammeter: pump current (RMS)
    6 1 Active power in KW (RMS)
    7 1 Power factor (Cos φ)
    8 Controller 1 Voltmeter: Internal voltage
    9 Controller 1 Voltmeter: back-up battery voltaje
  • PUMS & SYSTEM PROTECTION
    1 Voltage loss
    2 Normal power phase reversal
    3 Normal frequency loss
    4 Jockey pump protection trip
    5 Controller power loss
    6 Low water reservoir tank
    7 Low back-up battery voltage
    8 Main pump pressure switch open circuit
    9 Low power factor jockey pump
    10 Under-current Jockey pump
    11 Overload Jockey pump
    12 Pressure sensor fault
  • COMMUNICATIONS & SIGNAL TRANSMISSION
    1 micro USB Port Boot loader for firmware upgrading
    2 SAF8M (control panel PLC ) configuration
    3 PC monitoring: Pump and installation general condition
    4 Pendrive data down-load: Events log / Pressures log
    5 ETHERNET (Optional) SAF8M (control panel PLC ) configuration
    6 PC monitoring: Pump and installation general condition
    7 RS485 port (Optional) SAF8M (control panel PLC ) configuration
    8 PC monitoring: Pump and installation general condition
    9 Voltage free contacts :
    up to 30 V DC / 0,3 A
    Voltage loss
    10 Pump non automatic mode
    11 Fail to start / not discharge pressure
    12 Grouped alarmas
    13 Pump on demand
    14 Pump running

     

  • LANGUAGES / OTHER FEATURES
    1 ENGLISH / ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES / DEUTSCH / NEDERLANDSE
    2 System pressure meter: Value displayed on digital screen. Selection of demand and stop levels
    3 3 operatin modes: OFF/ MAN / AUTO
    4 Events log: Historical of 500 events in memory: Downloadable to pendrive
    5 Pressures register log: Historical of 16,000 records in memory: Downloadable to pendrive
    6 Jockey pump start count & hours and minutes
    7 Power elements: Contact breakers in AC-3 / Isolator switches in AC-23