FIRE FIGHTING

SCF8C-J-M

NOVEDAD
SCF8C-J-M

SCF8C-J-M control panels, are small user friendly and configurable instruments, useful for automatically opérate single phase electric motor driven Jockey pumpsets in any environment

SCF8C-J -M control panels automatically start and stop single phase Jockey pumpsets depending on the system’s demand; protect them by means of the connected and controller-generated alarms, visualize the most relevant values and informations, also manage the communication of the operator and both the contour elements and the remoted manned centre.

MAIN FEATURES

  • STANDARDS & TECHNICAL RULES
    1Standard EN 12845 Ed. 2015
    2Standard UNE 23500 Ed.2012 Ed. 2021
    3Standard UNI 10779 Ed. 2014
    4Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies
    5Tech. Rule CEPREVEN R.T.1-ROC Ed.2004
    6Tech. Rule CEPREVEN R.T.2-ABA Ed.2006
  • RANGE OF MODELS (according to the type plate)
    1Incoming line voltaje230 V AC
    2Mains frequency50Hz / 60Hz.
    3Jockey pump motor sizeUp to 3,00 kW
    4Motor starter typeDirect (DOL)
  • CONSTRUCTIVE FEATURES
    1External enclosureIP65 Protected from total dust ingress (NEMA 4)
    2Impact rating: IK10 (except for display)
    3Fireproof grade: Fire extinguishes <30s
    4DisplayTransflective: Visible under direct sunlight
    5WiringHalogen free
    6Fireproof: RZ1 according to EN50200 (830ºC for 90min)
    7Pump room temperature20 ºF to 122ºF (-5ºC to 55ºC)
    8Isolation rating between phases500 V AC
    9Isolation rating between phases and ground2.500 V AC
    10Isolation impedance between phases and ground2 MΩ
    11Earthing systemTT system (neutral and earht connected separatelly )
    12Electromagnetic environmentCEM-1
  • MEASURING INSTRUMENTS IN THE DISPLAY
    1System1 Voltmeter: voltage for every phase L1-N(RMS)
    21 Mains frequency meter
    31 pump rotation/phase rotation
    41 Manometer pump discharge pressure ( pressure sensor required with 4-20 mA signal)
    5Jockey pump1 Ammeter: pump current (RMS)
    61 Active power in KW (RMS)
    71 Power factor (Cos φ)
    8Controller1 Voltmeter: Internal voltage
    9Controller1 Voltmeter: back-up battery voltage
  • PUMS & SYSTEM PROTECTION
    1Voltage loss
    2Normal power phase reversal
    3Normal frequency los
    4Jockey pump protection trip
    5Thermal overcurrent Jockey pump
    6Jockey pump fail to start
    7Low water reservoir tank
    8Fuses tripped
    9Controller power loss
  • COMMUNICATIONS & SIGNALS TRANSMISSION
    1USB PortBoot loader for firmware upgrading
    2Voltage free contacts : Up to 250 V AC / 2 APump running
    3Grouped alarms
  • LANGUAGES / OTHER FEATURES
    1ENGLISH / ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES
    2Jockey pump start count
    3Pressure sensor & switch status
    480dB buzzer