FIRE FIGHTING

SCF830-D-U

DISCONTINUED
EN12845 Diesel Fire pump Controller

SCF830-D-U controllers are high specifications, automatic and configurable instruments, useful for managing operations of any tipe diesel engine driven fire-fighting pumpsets (Diesel Fire Pumps) of any power in any environment.

They govern the start and stop of the Diesel Fire Pumps and protect them by means of the action of the connected and controller-generated alarms, visualize the most relevant values and informations, also manage the communication with the operator and both the contour elements and the remote manned centre.

MAIN FEATURES

  • STANDARDS & TECHNICAL RULES
    1Standard EN 12845 Ed.2016
    2Standard UNE 23500 Ed.2021 & Ed. 2012
    3Standard UNI 10779 Ed. 2014
    4Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies
  • RANGE OF PRODUCTS (according to the type plate)
    1Nominal supply voltage230 Vac
    2Nominal frequency50Hz / 60Hz.

     

    RANGE OF PANELS ACCORDING TO BATTERY CHARGERS SCF830-D-U 12070SCF830-D-U 12100SCF830-D-U 24035SCF830-D-U 24050
    Nominal Voltage12 Vdc12 Vdc24 Vdc24 Vdc
    Rated Amp7 A10 A3,5 A5 A
    DIN Power96,6 W138,0W96,6 W138,0 W
    Capacity of the batteries (C10)200 Ah285 Ah100 Ah142 Ah
  • CONSTRUCTIVE FEATURES
    1EnclosureIngress protection rating: IP65
    2Protection against impacts degree: IK10 except PLC SAF830-D-U
    3Fireproof degree: The fire is extinguished in <30s with dripping
    4DisplayGraphic / Transflective
    5CablingFree of halogens
    6Fire resistance: RZ1 according to EN50200 (Max: 830º / 90min)
    7Working temperaturesFrom -5ºC to 50ºC
  • MEASURING INSTRUMENTS IN THE DISPLAY
    1Batteries2 Voltmeter: Battery voltage
    22 Ammeter: Battery charging Amp
    41 Battery equalization timer
    5Engine1 Fuel tank level meter
    61 Oil pressure gauge (sensor not included)
    71 Engine wáter  thermometer (sensor not included)
    81 Engine oil thermometer (sensor not included)
    91 Engine speed meter (sensor not included)
    10System1 System pressure meter (sensor not included)
    111 Flow meter ( manual introduction / 4⁄20mA sender not included)
    121 Voltmenter AC V supply voltaje
  • PUMP & SYSTEM PROTECTION
    1MAINS FAILURE
    2OVER SPEED
    3LOW OIL PRESSURE
    4COOLANT HIGH TEMPERATURE
    5LOW FUEL LEVEL
    6LOW BATTERY A VOLTAGE
    7LOW BATTERY B VOLTAGE
    8CHARGER A FAULT
    9CHARGER B FAULT
    10HEATER PROTECTION TRIPPED
    11CRANK ENGINE VOLTAGE FAIL
    12FAILED TO START
    13LOW DISCHARGE PRESSURE
    14LOW RESERVOIR TANK
    15LOW PRIMING TANK
    16SPEED SIGNAL FAULT
    17PRESSURE SWITCH SHORT-CIRCUIT
    18PRESSURE SWITCH OPEN-CIRCUIT
    19MAINS FREQUENCY FAIL
    20COMMUNICATION
    30CRANKING LEVERS FAULT
    31LOW COOLANT TEMPERATURE
    32DC VOLTAGE FAIL
    33HIGH BATTERY A VOLTAGE
    34HIGH BATTERY B VOLTAGE
    35BATTERY A DEFECTIVE
    36BATTERY B DEFECTIVE
    37WATER PRESSURE SENSOR FAULT
  • 1Device: USB connector type BCommunication SAF830-D<—>PC
    2Host: USB connector typeCommunication SAF830-D<—> Pendrive (external memory)
    3Ethernet port (TCP/IP)PC monitoring: Pump and installation general condition
    4RS 485 port (Optional)PC monitoring: Pump and installation general condition
    5Voltage free contacts :
    up to 30 V DC / 0,5 A
    Pump running with pressure
    6Mains failure
    7Pump running with pressure
    8Pump on demand
    9Failed to start / Discharge pressure fail
    10Not in auto mode
    11Grouped alarms / Control fail
  • LANGUAGES / OTHER FEATURES
    1ESPAÑOL / ENGLISH / ITALIANO / FRANÇAIS / PORTUGUES
    2Monitored pressure switch lines: Short circuit / open circuit alarm
    3Monitored connection solenoid box. Cranking levers fault alarm
    4Pump demand  by pressure transducer analog reading of system pressure
    5Current date and time (RTC with independent battery)
    6500 last events log (starts, alarms, …)
    716,000 latest records of system pressure variation
    850 pressure / Flow pump test récords
    9Calibration of analog measurements: Pressure / Voltage / Temperature …
    10Digital and analog inputs and outputs checking of  on the display
    11Accumulate engine operations hours and minutes
    12Engine cooling circuit management
    13Engine heating resistence management