FIRE FIGHTING

SCF122-DI

DISCONTINUED
SCF122-DI

SCF122-DI control panels are complete, automatic and configurable instruments, useful for managing operations of any tipe diesel engine driven fire-fighting pumpsets of any power in any environment.

They govern the start and stop of the diesel engine driven fire-fighting pumpsets and protect them by means of the action of the connected and controller-generated alarms, visualize the most relevant values and informations, also manage the communication with the operator and both the contour elements and the remote manned centre.

MAIN FEATURES

  • STANDARDS & TECHNICAL RULES
    1Standard EN 12845 Ed.2015
    2Standard UNE 23500 Ed.2012
    3Standard UNI 10779 Ed. 2014
    4Standard IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies
    5Tech. Rule CEPREVEN R.T.1-ROC Ed.2004
    6Tech. Rule CEPREVEN R.T.2-ABA Ed.2006
  • RANGE OF PRODUCTS (according to the type plate)
    1Nominal supply voltage230 V AC
    2Nominal frequency50Hz / 60Hz.

     

    RANGE OF PANELS ACCORDING TO BATTERY CHARGERS SCF122-DI 12070SCF122-DI 12100SCF122-DI 24035SCF122-DI 24050
    Nominal Voltage12 V DC12 V DC24 V DC24 V DC
    Rated Amp7 A10 A3,5 A5 A
    DIN Power96,6 W138,0W96,6 W138,0 W
    Capacity of the batteries (C10)200 Ah285 Ah100 Ah142 Ah
  • CONSTRUCTIVE FEATURES
    1EnclosureIngress protection rating: IP65
    2Protection against impacts degree: IK10 except PLC IGNIMATIC D122
    3Fireproof degree: The fire is extinguished in <30s with dripping
    4DisplayLCD 4 lines / 20 characters
    5CablingFree of halogens
    6Fire resistance: RZ1 according to EN50200 (Max: 830º / 90min)
    7Working temperaturesFrom -5ºC to 50ºC
  • MEASURING INSTRUMENTS IN THE DISPLAY
    1Batteries2 Voltmeter: Battery voltage
    22 Ammeter: Battery charging Amp
    41 Battery equalization timer
    5Engine1 Fuel tank level meter
    61 Oil pressure gauge (sensor not included)
    71 Engine temperature thermometer (sensor not included)
    81 Engine speed meter (sensor not included)
  • PUMP & SYSTEM PROTECTION
    1System not in autamatic mode
    2Mains failure
    3Engine over-speed
    4Low oil pressure
    5High engine temperature
    6Low fuel level
    7Battery A low voltage
    8Battery B low voltage
    9Loss of charger A protection
    10Loss of charger B protection
    11Heater overload tripped
    12Bendix voltage fail
    13Fail to start
    14Discharge pressure fail
    15Low reservoir tank
    16Low priming tank
    17Pick-up fault
  • 1RS485 port (Optional)IGNIMATIC D122 controller configuration
    2PC monitoring: Pump and installation general condition
    3Ethernet port (Optional)IGNIMATIC D122 controller configuration
    4PC monitoring: Pump and installation general condition
    5Voltage free contacts :
    up to 30 V DC / 0,3 A
    Power not available
    6Automatic mode Off
    7Fail to start / not discharge pressure
    8Grouped alarms
    9Pump on demand
    10Pump running with pressure
  • LANGUAGES / OTHER FEATURES
    1ENGLISH/ ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES
    2Engine heating management via temperature reading probe
    3Engine hours
    4Engine coolant circuit management
    5Buzzer: 80dB
    6Event historical: Last 47 events